TOP 200-301 Vce Files 100% Pass | The Best Cisco Exam Cisco Certified Network Associate Exam Course Pass for sure

2025 Latest GetValidTest 200-301 PDF Dumps and 200-301 Exam Engine Free Share: https://drive.google.com/open?id=1m1bhHj28fXL5gbceEjubYwhK61TpRWST

Passing the 200-301 exam with least time while achieving aims effortlessly is like a huge dreams for some exam candidates. Actually, it is possible with our proper 200-301 learning materials. To discern what ways are favorable for you to practice and what is essential for exam syllabus, our experts made great contributions to them. All 200-301 Practice Engine is highly interrelated with the exam. You will figure out this is great opportunity for you.

Cisco 200-301 certification exam is a single exam that covers a wide range of networking topics. 200-301 exam is designed to validate the candidate's understanding of network concepts and their ability to configure, troubleshoot, and manage Cisco networks. 200-301 Exam is available in multiple languages and can be taken at any Pearson VUE testing center worldwide.

>> 200-301 Vce Files <<

Exam 200-301 Course - Relevant 200-301 Questions

Hence, memorizing them will help you get prepared for the Cisco 200-301 examination in a short time. The product of GetValidTest comes in PDF, desktop practice exam software, and Cisco Certified Network Associate Exam (200-301) web-based practice test. To give you a complete understanding of these formats, we have discussed their features below.

Cisco Certified Network Associate Exam Sample Questions (Q653-Q658):

NEW QUESTION # 653
An engineer must configure a/30 subnet between two routers. Which usable IP address and subnet mask combination meets this criteria?

A. Option D
B. Option C
C. Option B
D. Option A

Answer: D

NEW QUESTION # 654
Refer to the exhibit. What is the metric of the route to the 192.168.10.33/28 subnet?

A. 0
B. 1
C. 2
D. 3
E. 4

Answer: C

Explanation:
What route would you use to send traffic to the 192.168.10.33/28 subnet. 192.168.10.33 is part of the 192.168.10.32/28 subnet and would use that OSPF route. These IPs would also use that same route (.33 - .47)/ (AD/METRIC) (110/193).

NEW QUESTION # 655
Refer to exhibit.

Which statement explains the configuration error message that is received?

A. It belongs to a private IP address range.
B. The router does not support /28 mask.
C. It is a broadcast IP address
D. IT is a network IP address.

Answer: C

NEW QUESTION # 656
All physical cabling is in place. Router R4 and PCI are fully configured and inaccessible. R4's WAN interfaces use .4 in the last octet for each subnet.
Configurations should ensure that connectivity is established end-to-end.
1 . Configure static routing to ensure RI prefers the path through R2 to reach only PCI on R4's LAN
2. Configure static routing that ensures traffic sourced from RI will take an alternate path through R3 to PCI in the event of an outage along the primary path
3. Configure default routes on RI and R3 to the Internet using the least number of hops Guidelines This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.

A. SeethesolutionbelowinExplanation

Answer: A

Explanation:
To configure static routing on R1 to ensure that it prefers the path through R2 to reach only PC1 on R4's LAN, you need to create a static route for the host 10.0.0.100/8 with a next-hop address of 20.0.0.2, which is the IP address of R2's interface connected to R1. You also need to assign a lower administrative distance (AD) to this route than the default AD of 1 for static routes, so that it has a higher preference over other possible routes. For example, you can use an AD of 10 for this route. To create this static route, you need to enter the following commands on R1's console:
R1#configure terminal R1(config)#ip route 10.0.0.100 255.0.0.0 20.0.0.2 10 R1(config)#end To configure static routing on R1 that ensures that traffic sourced from R1 will take an alternate path through R3 to PC1 in the event of an outage along the primary path, you need to create another static route for the host 10.0.0.100/8 with a next-hop address of 40.0.0.2, which is the IP address of R3's interface connected to R1. You also need to assign a higher AD to this route than the AD of the primary route, so that it has a lower preference and acts as a backup route. For example, you can use an AD of 20 for this route. This type of static route is also known as a floating static route. To create this static route, you need to enter the following commands on R1's console:
R1#configure terminal R1(config)#ip route 10.0.0.100 255.0.0.0 40.0.0.2 20 R1(config)#end To configure default routes on R1 and R3 to the Internet using the least number of hops, you need to create a static route for the network 0.0.0.0/0 with a next-hop address of the ISP's interface connected to each router respectively. A default route is a special type of static route that matches any destination address and is used when no other specific route is available. The ISP's interface connected to R1 has an IP address of 10.0.0.4, and the ISP's interface connected to R3 has an IP address of 50.0.0.4. To create these default routes, you need to enter the following commands on each router's console:
On R1: R1#configure terminal R1(config)#ip route 0.0.0.0 0.0.0.0 10.0.0.4 R1(config)#end On R3: R3#configure terminal R3(config)#ip route 0.0.0.0 0.0.0.0 50.0.0.4 R3(config)#end

NEW QUESTION # 657
Refer to the exhibit. Router R14 is in the process of being configured.
Which configuration must be used to establish a host route to PC 10?

A. ip route 10.80.65.10 255.255.255.255 10.73.65.66
B. ip route 1073.65.65 255.0.0.0 10.80.65.10
C. ip route 10.73.65.66 0.0.0.255 10.80.65.10
D. ip route 10.80.65.10 255.255.255.254 10.80.65.1

Answer: A

NEW QUESTION # 658
......

In the world of industry, 200-301 certification is the key to a successful career. If you have achieved credential such as 200-301 then it means a bright future is waiting for you. Avail the opportunity of 200-301 dump at GetValidTest.com that helps you in achieving good scores in the exam. Due to these innovative methodologies students get help online. The 200-301 Exam Questions Answers PDF is very effective and greatly helpful in increasing the skills of students. They can easily cover the exam topics with more practice due to the unique set of 200-301 exam dump. The 200-301 certification learning is getting popular with the passage of time.

Exam 200-301 Course: https://www.getvalidtest.com/200-301-exam.html

2025 Latest GetValidTest 200-301 PDF Dumps and 200-301 Exam Engine Free Share: https://drive.google.com/open?id=1m1bhHj28fXL5gbceEjubYwhK61TpRWST